SUGON 8610DX 1000W Hot Air Rework Station For Phone Repair
- It has four working channels: CH1, CH2, CH3, CH4, and
- The air volume and temperature of each channel can be set and stored.
- It has a variety of protection functions and perfect button functions.
- The convenient real-time operation, with magnetic switch control, the handle is placed in the hand
- The handle frame immediately goes to sleep.
- With the automatic sleep function, the parameters can be adjusted in the sleep state
- Set up.
- Sensor closed loop, microcomputer zero-crossing trigger temperature control, high power,
- The temperature rises quickly, and the temperature adjustment is convenient and accurate, and stable and is not affected by the air output.
- Using a brush less vortex fan, the airflow is adjustable, the range is large, and it can be suitable
- Should be used for multiple purposes.
- The system is equipped with an automatic large air volume cooling function to extend the life of the heating element,
- Protect the hot air handle.
- Real-time ℃/℉ temperature display function.
- Has the function of self-calibration of temperature.
- Suitable for disassembly and soldering of a variety of components, such as SOIC, CHIP, QFP,
- PLCC, BGA, etc.
- Suitable for heat shrinkage, drying, paint removal, de bonding, thawing, preheating, disinfection,
- Glue welding, etc.
- The air volume is adjustable, suitable for fields that require small air volume and large air volume heating
- Suitable for lead-free hot air de soldering occasions.
- Temperature unit conversion
- During use, press the “multi-function button” to use the warm
- Degree “℃→℉” or “℉→℃”.
- Buzzer settings
- During use, press and hold the “multi-function button” for two seconds to turn off
- Turn off or turn on the buzzer sound.
- Temperature calibration settings
- When the host is off, press and hold the “Multi-function button” for two seconds, then press
- Turn on the power switch to enter the temperature calibration setting status interface, press the air volume
- +- the key to set the correct temperature, after setting, click “more
- Function key” exits the temperature calibration function and enters the working state.
- 1 x SUGON 8610DX
- 1 x Air Gun Stand
- 5 x Nozzle
- 1 x Grounding Wire